l2:DomMbrIf
The layer to the attachment to the bridge interface.
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| name | naming:Name (string:Basic) |
Name | MAX SIZE: 16 |
Operational Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| accessVlan | l2:DomId (scalar:Uint32) |
port's access vlan | RANGE: [1 , 4096] |
| allowedVlanBmp | l2:VlanBitmap (base:BitArray) |
allowed-vlan-bitmap used to track vlans that are configured on the interface | ARRAY SIZE: 4096 |
| bundlePortSt | l1:OperSt (scalar:Enum8) |
bundle_port_state to track port-channel's operational status | SELECTION: 0 - unknown 1 - down 2 - up 3 - link-up DEFAULT: down |
| createFlag | l2:CreateState (scalar:Enum8) |
create-flag to track interface creation status | SELECTION: 1 - created 2 - removed 3 - deleted-and-stale DEFAULT: removed |
| nativeVlan | l2:DomId (scalar:Uint32) |
port's native vlan | RANGE: [1 , 4096] |
| phyPortState | l1:OperSt (scalar:Enum8) |
phy-port-state to track port's physical state | SELECTION: 0 - unknown 1 - down 2 - up 3 - link-up DEFAULT: down |
| pmPortMode | l1:Mode (scalar:Enum8) |
pm-port-mode to track port's mode (access | SELECTION: 1 - access 2 - trunk 3 - fex-fabric 4 - dot1q-tunnel 5 - promiscuous 6 - host 7 - trunk_secondary 8 - trunk_promiscuous 9 - vntag DEFAULT: access |
| pmPortState | l1:OperSt (scalar:Enum8) |
pm-port-state to track port's protocol state | SELECTION: 0 - unknown 1 - down 2 - up 3 - link-up DEFAULT: down |
| trunkPortUpVlanBmp | l2:VlanBitmap (base:BitArray) |
up-vlan-bitmap used to track vlans that are up on the interface | ARRAY SIZE: 4096 |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| ifIdx | nw:IfId (base:IfIndex) |
if-index (Secondary Key) | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |